模組:BigNumber/utils
![]() | 此模块被引用於約7,700個頁面。 為了避免造成大規模的影響,所有對此模块的編輯應先於沙盒或測試樣例上測試。 測試後無誤的版本可以一次性地加入此模块中,但是修改前請務必於討論頁發起討論。 模板引用數量會自動更新。 |
本模組儲存Module:BigNumber的工具函數。
上述文档嵌入自Module:BigNumber/utils/doc。 (编辑 | 历史) 编者可以在本模块的沙盒 (编辑 | 差异)和测试样例 (创建)页面进行实验。 本模块的子页面。 |
local main_module = "Module:BigNumber"
local utils = {}
local cmath = {}
local bignum = {}
local lib_calc = {}
--大數帶餘長除法 / 可作為進制轉換用的帶餘長除法
function utils.modulo_div(n, _original_base, destination_base, fractional_flag)
local original_base = tonumber(_original_base)
local non_number_base = not original_base --確認是否為非數字進制
if non_number_base then original_base = 1 end
local carry = 0
local result = {0} --儲存商的陣列
for i =fractional_flag and #n or 1,fractional_flag and 1 or #n, fractional_flag and -1 or 1 do
if non_number_base then
original_base = utils.getBaseValue(_original_base, fractional_flag and (-i) or (#n - i))
if utils.isInf(original_base) then original_base = 10 end --若混合底數出現無限大作為十進制計算
end
local d = n[i]
if fractional_flag then --進制轉換時,小數點以後用乘的
d = d * math.abs(destination_base) + carry
carry = math.floor(d / original_base)
d = utils.mod(d, original_base)
if destination_base < 0 then d = -d end
else --對每個位數進行帶餘長除法
d = d + original_base * carry --上一位的餘數,取下一位
carry = utils.mod(d, destination_base) --新的餘數
d = math.floor(d / destination_base) --商
end
result[i] = math.floor(d) --紀錄商
end
if fractional_flag and destination_base < 0 then carry = -carry end
return result, carry --回傳商, 餘數
end
function utils._convertBase(n, _original_base, _destination_base, fractional_flag, total_digit)
local digits = {}
if utils.isInf(_original_base) then
error(string.format("底數不能為 '%s'", tostring(_original_base)),2)
end
if fractional_flag and utils.isInf(_destination_base) then --無限大進制的小數位數位置值為 1/無限大 是零,無法表示小數
return {}
end
local original_base = utils.getBaseValue(_original_base, 0)
local destination_base = utils.getBaseValue(_destination_base, 0)
local dn, digit = n
local max_digit = total_digit or math.max(#n+1, 20) --未指定時不超過20位
local i = 0
local src_max_digit = #dn
--進位轉換為不斷帶餘除法直到商為0
while not utils.is_zero(dn) do
destination_base = utils.getBaseValue(_destination_base, fractional_flag and (-i - 1) or i)
--以帶餘長除法計算各個位數 (回傳值 => 商, 位數)
dn, digit = utils.modulo_div(dn, _original_base, destination_base, fractional_flag)
if digit < 0 then --負底數進位會遇到餘數小於0的情況
digit = digit + math.abs(destination_base) --加成正的
if fractional_flag then
else --商+1 (因為等於多減一次除數)
dn[#dn] = dn[#dn] + 1
end
end
--計算小數時,位數加在末尾
if fractional_flag then
if utils.isNaN(digit) then break end
digits[#digits + 1] = digit
if i >= max_digit then break end
--計算整數時,位數加在開頭
else
table.insert(digits, 1, digit)
end
i = i + 1
end
return digits
end
function utils.is_zero(n)
for _,d in ipairs(n) do
if d ~= 0 then return false end
end
return true
end
function utils.myfloor(n)
if math.abs(math.ceil(n)-n)<1e-12 then return math.ceil(n) end
return math.floor(n)
end
function utils.myceil(n)
if math.abs(math.floor(n)-n)<1e-12 then return math.floor(n) end
return math.ceil(n)
end
function utils.round(n)
return utils.myfloor(n + 0.5)
end
function utils.mod(n, m)
if utils.isInf(m) then return n end
return n % m
end
function utils.loop_mod(n, m)
if utils.isInf(m) then return n end
local result = n % m
return (result == 0) and m or result
end
function utils.tonumber(n)
local check = tostring(n)
check = mw.ustring.gsub(check, '∞', 'inf')
return tonumber(check)
end
function utils.tostring(n)
local result = tostring(n)
result = mw.ustring.gsub(result, '^%s*([+-]?)inf%s*$', '%1∞')
result = mw.ustring.gsub(result, '%-', '−')
return result
end
function utils.isInt(n)
return math.abs(utils.myfloor(n)-n)<1e-12
end
function utils.isInf(num)
local num_str = tostring(num):lower()
return num_str=='inf' or num_str=='-inf' or num_str=='−inf' or num_str=='+inf'
end
function utils.isNaN(num)
local num_str = tostring(num):lower()
return num_str=='nan' or num_str=='-nan' or num_str=='−nan' or num_str=='+nan'
end
function utils.cintpow(num, power)
if type(cmath.constructor) ~= type(tostring) then cmath = require("Module:Complex Number").cmath.init()end
power = utils.round(power)
local this = cmath[0] + cmath.constructor(num)
if power < 0 then --負的次方為倒數自乘
this = cmath.inverse(this)
power = -power
end
if power == 0 then return cmath[0] + 1 end
if power == 1 then return cmath[0] + this end
if power == 2 then return this * this end
local loge = math.log(power)
local log2 = loge / math.log(2)
if utils.isInt(log2) then --次方為2的冪 直接連續自乘,以減少乘法運算的次數
local result = this
for i=1,log2 do result = result * result end
return result
end
local times_data = {}
local times_times = {}
local two_time = utils.round(math.pow(2, math.floor(log2))) --其餘情況轉換成2的冪的組合,以減少乘法運算的次數
local lose_time = power - two_time
local to_times = cmath[0] + this
local zero_flag = 0
repeat --重複分成2的冪的組合
for i=1,log2 do to_times = to_times * to_times end
times_data[#times_data+1] = to_times --紀錄本次自乘次數的結果
times_times[#times_times+1] = two_time
log2 = math.log(lose_time) / math.log(2) --計算剩餘數字的2的冪的組合
two_time = math.pow(2, math.floor(log2))
lose_time = lose_time - two_time --計算扣除本次的2的冪的次數後剩下多少次要乘
to_times = cmath[0] + this
if lose_time <= 0 then zero_flag = zero_flag + 1 end --剩餘次數為0為迴圈結束條件
until zero_flag > 1
local result = cmath[1]
for i=1,#times_data do result = result * times_data[i]end --將所有自乘次數的結果相乘
return result
end
function utils._swap(x,i,y,j) local t = x[i]; x[i] = y[j]; y[j] = t end
function utils.fibonacci_coding(int_digits, original_base, _destination_base, fractional_flag, total_digit, fib_code)
local sqrt5 = math.sqrt(5)
local phi = (sqrt5 + 1) * 0.5
local logphi = math.log(phi)
local function fibonacciId(x)return utils.myceil(math.log(x*sqrt5-0.5)/logphi)end
local function fibonacci(an)return math.floor(math.pow(phi, an) / sqrt5 + 0.5)end
if fractional_flag then
if fib_code then return {} end
local number = utils.toDecimal({0}, int_digits, original_base)
if number == 0 then return {} end
local max_digs = total_digit or math.max(#int_digits + 1,20)
local result = {}
for i=1,max_digs do
local place_value = 1 / fibonacci(i+2)
if place_value > number then
result[#result + 1] = 0
else
result[#result + 1] = 1
number = number - place_value
end
if number == 0 then break end
end
return result
end
local n = utils.myfloor(utils.toDecimal(int_digits, {}, original_base))
if math.abs(tonumber(table.concat(int_digits,''))-1)<1e-14 then
return fib_code and {1,1} or {1,0}
end
local k = utils.myceil(math.log(n*sqrt5-0.5)/logphi)
local vaild_fib = {}
local max_id = 0
local x0 = n
while x0 > 0 do
local id = fibonacciId(x0)
local digval = fibonacci(id)
if digval > x0 then
id = id - 1
digval = fibonacci(id)
end
x0 = x0 - digval
if id > max_id then max_id = id end
vaild_fib[id] = 1
end
local result = {}
for i=max_id,(fib_code and 2 or 1),-1 do
result[#result + 1] = vaild_fib[i] or 0
end
if fib_code then
local the_code = {1}
for i=1,#result do
table.insert(the_code, 1, result[i])
end
return the_code
end
return result
end
function utils.real_negabase(int_digits, fractional_digits, original_base, destination_base, _sign)
local num = utils.toDecimal(int_digits, fractional_digits, original_base)
local sign = _sign
if _sign < 0 then
sign = sign * -1
num = -num
end
local b = destination_base
local sb = math.abs(b)
local mb, pb = -sb / (sb + 1), 1 / (sb + 1)
local lb, rb = mb, pb
if lb > rb then lb, rb = pb, mb end
local p_chack = math.log((num/lb > 0) and num/lb or num/rb)/math.log(sb)
local fp, cp = math.floor(p_chack), math.ceil(p_chack)
local lp, rp = fp, cp
if lp > rp then lp, rp = cp, fp end
local p_list = {lp-1, lp, rp, rp+1}
local p = lp
local min_x = math.huge
for i=1,#p_list do
local p0 = num / math.pow(b, p_list[i])
if p0 >= lb and p0 <= rb then
if p0 < min_x then
min_x = p0
p = p_list[i]
end
end
end
local Tb = function(x) return b*x - math.floor(b*x-lb) end
local Tbj = min_x
if p<0 then Tbj = num end
local k = p
local int_result, fractional_result = {}, {}
for i=k-1,0,-1 do
local digit = math.floor(b * Tbj - lb)
Tbj = Tb(Tbj)
int_result[#int_result + 1] = digit
end
if #int_result == 0 then int_result[1] = 0 end
if math.abs(Tbj) > 0 then
for i=1,20 do
local digit = math.floor(b * Tbj - lb)
Tbj = Tb(Tbj)
fractional_result[#fractional_result + 1] = digit
if math.abs(Tbj) <= 0 then break end
end
end
return int_result, fractional_result, sign
end
function utils.non_integer_base(int_digits, fractional_digits, original_base, destination_base, _sign)
local n = utils.toDecimal(int_digits, fractional_digits, original_base)
local sign = _sign
if n < 0 then
sign = sign * -1
n = -n
end
local k = utils.myfloor(math.log(n)/math.log(destination_base)) + 1
local int_result, fractional_result = {}, {}
for i=k-1,0,-1 do
local digit = utils.myfloor((n / utils.getPlaceValue(destination_base, i)) % destination_base)
n = n - digit * utils.getPlaceValue(destination_base, i)
int_result[#int_result + 1] = digit
end
if n > 0 then
for i=1,20 do
local digit = utils.myfloor((n / utils.getPlaceValue(destination_base, -i)) % destination_base)
n = n - digit * utils.getPlaceValue(destination_base, -i)
fractional_result[#fractional_result + 1] = digit
if n <= 0 then break end
end
end
return int_result, fractional_result, sign
end
function utils.negabaseCarry(int_digits, fractional_digits, destination_base, sign)
if math.abs(fractional_digits[1]or 0) > 0 and (sign or 0) > 0 then
int_digits[#int_digits] = int_digits[#int_digits] + 1
end
local carry = 0
local abs_base = utils.round(math.abs(destination_base))
for i=#fractional_digits,1,-1 do
local d = utils.round(fractional_digits[i]) + carry
carry = 0
if d >= abs_base then
carry = i%2 and -1 or 1
d = d - abs_base
end
if d < 0 then
carry = i%2 and 1 or -1
d = d + abs_base
end
fractional_digits[i] = utils.round(d)
end
local j = 0
for i=#int_digits,1,-1 do
j = #int_digits - i
local d = utils.round(int_digits[i]) + carry
carry = 0
if d >= abs_base then
carry = j%2 and -1 or 1
d = d - abs_base
end
if d < 0 then
carry = j%2 and 1 or -1
d = d + abs_base
end
int_digits[i] = utils.round(d)
end
while math.abs(carry) > 0 do
j = j + 1
local d = utils.round(carry)
carry = 0
if d >= abs_base then
carry = j%2 and -1 or 1
d = d - abs_base
end
if d < 0 then
carry = j%2 and 1 or -1
d = d + abs_base
end
table.insert(int_digits, 1, utils.round(d))
end
for i=1,#int_digits-1 do if int_digits[1] == 0 then table.remove(int_digits, 1) end end
return int_digits, fractional_digits
end
local function complexBase2Decimal(num, imag, base)
if type(cmath.constructor) ~= type(tostring) then cmath = require("Module:Complex Number").cmath.init()end
local base = cmath.constructor(base)
if not base then return nil end
num = mw.text.trim(num)
local sign = 1
local first_sign = mw.ustring.sub(num,1,1)
--讀取正負號
if first_sign == '+' or first_sign == '-' or first_sign == '−' then
num = mw.ustring.sub(num,2,-1)
if first_sign == '-' or first_sign == '−' then
sign = -1
end
end
if type(lib_calc._getNumString) ~= type(tostring) then lib_calc = require('Module:Complex_Number/Calculate')end
local int_digits, fractional_digits = lib_calc._getNumString(num, true)
local result = cmath.constructor(utils.toDecimalComplex(int_digits, fractional_digits, imag, base))
if sign < 0 then result = result * -1 end
return result
end
function utils.complexBaseConvert(num, to, from, digs, precision)
if mw.ustring.find(to..' '..from, "[%+%-−%d]i") then
if type(cmath.constructor) ~= type(tostring) then cmath = require("Module:Complex Number").cmath.init()end
num = mw.ustring.gsub(num, '−', '-')
to = mw.ustring.gsub(to, '−', '-')
from = mw.ustring.gsub(from, '−', '-')
local cto, cfrom = cmath.constructor(tostring(to)), cmath.constructor(tostring(from))
cfrom = cfrom or cmath.constructor(10)
if cto and cfrom then
local number = tostring(num)
number = mw.text.trim(number)
--轉換為十進制
if cmath.abs(cmath.im(cfrom)) < 1e-14 and cmath.abs(cmath.re(cfrom)) > 0 then
local check_number = num
if not mw.ustring.find(check_number,"^[%+%-−]") then check_number = '+'..num end
number = mw.ustring.gsub(check_number, "[%+%-−][%a%d%.,;:]+", function(number_part)
if type(bignum.convertBase) ~= type(tostring)then bignum = require(main_module)end
local is_imag = (mw.ustring.sub(number_part,-1,-1) == 'i')
local convert_number = is_imag and mw.ustring.sub(number_part,1,-2) or number_part
if convert_number == '' or convert_number == '+' or convert_number == '-' or convert_number == '−' then convert_number = convert_number..'1' end
convert_number = bignum.convertBase(convert_number, 10, from)..(is_imag and 'i' or '')
if not mw.ustring.find(convert_number,"^[%+%-−]") then convert_number = '+'..convert_number end
return mw.ustring.gsub(convert_number, '−', '-')
end)
else
local check_number = num
if not mw.ustring.find(check_number,"^[%+%-−]") then check_number = '+'..num end
number = mw.ustring.gsub(check_number, "[%+%-−][%a%d%.,;:]+", function(number_part)
if type(lib_calc.scientific2number) ~= type(tostring) then lib_calc = require('Module:Complex_Number/Calculate')end
local is_imag = (mw.ustring.sub(number_part,-1,-1) == 'i')
local convert_number = is_imag and mw.ustring.sub(number_part,1,-2) or number_part
convert_number = mw.ustring.gsub(convert_number, '−', '-')
if convert_number == '' or convert_number == '+' or convert_number == '-' or convert_number == '−' then convert_number = convert_number..'1' end
convert_number = complexBase2Decimal(convert_number, is_imag, cfrom)
convert_number = tostring(convert_number)
--跳脫科學記號,避免加與減和科學記號混淆
convert_number = mw.ustring.gsub(convert_number, "[Ee]%+?(%d)", "F%1")
convert_number = mw.ustring.gsub(convert_number, "[Ee]%-(%d)", "D%1")
if not mw.ustring.find(convert_number,"^[%+%-−]") then convert_number = '+'..convert_number end
--還原科學記號為一般數字
convert_number = mw.ustring.gsub(convert_number, "([%+%-−])([%a%d%.,;:]+)", function(number_sign_part,number_value_part)
local is_part_imag = (mw.ustring.sub(number_value_part,-1,-1) == 'i')
local number_value_part_real = is_part_imag and mw.ustring.sub(number_value_part,1,-2) or number_value_part
number_value_part_real = mw.ustring.gsub(number_value_part_real, "[DdFf]", function(Evalue) return ({D='e-',d='e-',F='e+',f='e+'})[Evalue] end)
return number_sign_part..lib_calc.scientific2number(number_value_part_real, true)..(is_part_imag and 'i' or '')
end)
return mw.ustring.gsub(convert_number, '−', '-')
end)
end
number = cmath.constructor(number)
if not number then
error(mw.ustring.format("轉換失敗:'%s' 不是有效的數字。",tostring(num)), 2)
return nil
end
local int_digits, fractional_digits = {}, {}
if cmath.abs(cto) <= 1 then
return nil
elseif cmath.abs(cmath.re(cto)) < 1e-14 then
local to_im = cmath.im(cto)
local to_im_sq = to_im * to_im
if to_im_sq > 1 then
local real, imag = cmath.re(number), cmath.i * cmath.im(number)
imag = imag * cmath.i * to_im
local function convert_part(num_val, base, frac_precision)
local num_str = tostring(num_val)
local sign = 1
local first_sign = mw.ustring.sub(num_str,1,1)
--讀取正負號
if first_sign == '+' or first_sign == '-' or first_sign == '−' then
num_str = mw.ustring.sub(num_str,2,-1)
if first_sign == '-' or first_sign == '−' then
sign = -1
end
end
if type(lib_calc._getNumString) ~= type(tostring) then lib_calc = require('Module:Complex_Number/Calculate')end
local int_digits, fractional_digits = lib_calc._getNumString(num_str, true)
if base < 0 and sign < 0 then
for i=1,#int_digits do int_digits[i] = -int_digits[i]end
for i=1,#fractional_digits do fractional_digits[i] = -fractional_digits[i]end
end
if utils.isInt(base) then
int_digits = utils._convertBase(int_digits, 10, base, false)
fractional_digits = utils._convertBase(fractional_digits, 10, base, true, tonumber(frac_precision<0 and '' or frac_precision))
if #int_digits == 0 then int_digits[1] = 0 end
if base < 0 then int_digits, fractional_digits = utils.negabaseCarry(int_digits, fractional_digits, base, sign)end
else
int_digits, fractional_digits = utils.real_negabase(int_digits, fractional_digits, 10, base, 1)
end
return int_digits, fractional_digits
end
local function revert(x)
rev = {}
for i=#x, 1, -1 do table.insert(rev, x[i])end
return rev
end
local real_int, real_frac = convert_part(cmath.re(real), -to_im_sq, precision)
local imag_int, imag_frac = convert_part(cmath.re(imag), -to_im_sq, precision)
table.insert(imag_frac, 1, imag_int[#imag_int])
table.remove(imag_int, #imag_int)
if utils.is_zero(imag_frac) then imag_frac = {} end
real_int, imag_int = revert(real_int), revert(imag_int)
for i=1,math.max(#real_int, #imag_int) do
table.insert(int_digits,1,real_int[i] or 0)
table.insert(int_digits,1,imag_int[i] or 0)
end
if int_digits[1] == 0 then table.remove(int_digits,1) end
for i=1,math.max(#real_frac, #imag_frac) do
table.insert(fractional_digits,imag_frac[i] or 0)
table.insert(fractional_digits,real_frac[i] or 0)
end
if fractional_digits[#fractional_digits] == 0 then table.remove(fractional_digits,#fractional_digits) end
end
elseif cmath.abs(cmath.re(cto)) >= 1 and cmath.abs(cmath.im(cto)) < 1e-14 then
local real, imag = cmath.re(number), cmath.im(number)
if type(bignum.convertBase) ~= type(tostring)then bignum = require(main_module)end
local real_result, imag_result = bignum.convertBase(real, cmath.re(cto), 10, digs, precision), bignum.convertBase(imag, cmath.re(cto), 10, digs, precision)
local real_is0, imag_is0 = ((tonumber(real_result)or 1) == 0), ((tonumber(imag_result)or 1) == 0)
if imag_is0 then return real_result, ''
elseif real_is0 and not imag_is0 then return ((math.abs(tonumber(({mw.ustring.gsub(imag_result, '−', '-')})[1]) or 0) ~= 1) and imag_result or ({mw.ustring.gsub(imag_result,'1','')})[1])..'i', ''end
local check_sign = mw.ustring.sub(imag_result,1,1)
return real_result .. ((check_sign == '+' or check_sign == '-' or check_sign == '−') and '' or '+') .. ((math.abs(tonumber(({mw.ustring.gsub(imag_result, '−', '-')})[1]) or 0) ~= 1) and imag_result or ({mw.ustring.gsub(imag_result,'1','')})[1]) ..'i', ''
elseif utils.isInt(cmath.re(cto)) and utils.isInt(cmath.im(cto)) and cmath.abs(cto) > 1 then
--尚不知道其他高斯整數底數的非整數轉換演算法。部分高斯整數底數無法轉換
local real, imag = cmath.re(number), cmath.im(number)
local function complex_div_quotient_remainder(input_number, base)
local base_real, base_imag = cmath.re(base), cmath.im(base)
local max_remainder = base_real * base_real + base_imag * base_imag
for i=0,max_remainder-1 do
local check_quotient = (input_number-i) / base
if utils.isInt(cmath.re(check_quotient)) and utils.isInt(cmath.im(check_quotient)) then
return check_quotient, i
end
end
end
local int_number = cmath.ceil(number)
local frac_number = number - int_number
if cmath.abs(frac_number) > 1e-14 then --阻止非高斯整數進行轉換,因為目前演算法不支援
error(mw.ustring.format("轉換失敗:底數 '%s' 不支援非高斯整數 '%s' 的轉換。",tostring(to), tostring(num)), 2)
return nil
end
local tk = (utils.myceil(math.log(cmath.abs(number))/math.log(cmath.abs(cto))) + 1) * 4 + 4
local do_number = int_number
local counter = 0
while cmath.abs(do_number) > 0 do
local quotient, remainder = complex_div_quotient_remainder(do_number, cto)
do_number = quotient
table.insert(int_digits,1,remainder)
counter = counter + 1
if counter > tk then --轉換到變成無窮迴圈,視為失敗
error(mw.ustring.format("轉換失敗:無法將 '%s' 轉換為底數 '%s' 的進制。", tostring(num), tostring(to)), 2)
return nil
end
end
if #int_digits == 0 then int_digits[1] = 0 end
else
return nil
end
local max_digs = 0
for i=1,#int_digits do if int_digits[i] > max_digs then max_digs = int_digits[i] end end
for i=1,#fractional_digits do if fractional_digits[i] > max_digs then max_digs = fractional_digits[i] end end
if #int_digits < digs then --補齊整數位數
local lose_digs = digs - #int_digits
for i=1,lose_digs do
table.insert(int_digits, 1, 0)
end
end
if #fractional_digits < precision then --補齊小數位數
local lose_digs = precision - #fractional_digits
for i=1,lose_digs do
fractional_digits[#fractional_digits+1] = 0
end
end
local int_result, fractional_result = utils.printAllDigit(int_digits, max_digs + 1, -1, 0, false), utils.printAllDigit(fractional_digits, max_digs + 1, precision, 0, true)
return int_result, fractional_result
end
end
return nil
end
function utils.factorial(n)
local result = 1
for i=1,n do result = result * i end
if n<0 then for i=1,-n do result = result / i end end --提供給阶乘进制 負的用除的
return result
end
utils.specialBaseData = {
['!']={
name = "!",
display = "!",
page = "阶乘进制",
digitsplit = ":",
point = ".",
placeValue = function(this, digit_id) return utils.factorial(digit_id)end,
baseValue = function(this, digit_id) return (digit_id < 0) and -digit_id or (digit_id + 1) end,
printDigit = function(this, digit)return tostring(digit) end,
needtoDecimal = false,
convertBase = utils._convertBase,
},
['#']={
name = "#",
display = "#",
page = "质数阶乘进制",
digitsplit = ":",
point = ".",
placeValue = function(this, digit_id)
if not lib_fact.primeIndex then lib_fact = require("Module:Factorization") end
local result = 1
for i=1,digit_id do result = result * ((i-1<=0) and 1 or lib_fact.primeIndex(i-1)) end
if digit_id<0 then for i=1,-digit_id do result = result / ((i-1<=0) and 1 or lib_fact.primeIndex(i-1)) end end
return result
end,
baseValue = function(this, digit_id)
if not lib_fact.primeIndex then lib_fact = require("Module:Factorization") end
return (digit_id < 0) and ((-digit_id<=1) and 1 or lib_fact.primeIndex(-digit_id-1)) or ((digit_id<=0) and 1 or lib_fact.primeIndex(digit_id))
end,
printDigit = function(this, digit)return tostring(digit) end,
needtoDecimal = false,
convertBase = utils._convertBase,
},
['!0']={ --以0-9A-Z表達的阶乘进制 (遇到超過36位數可能會出現亂碼)
name = "!0",
display = "!",
page = "阶乘进制",
digitsplit = "",
point = ".",
placeValue = function(this, digit_id) return utils.factorial(digit_id)end,
baseValue = function(this, digit_id)return (digit_id < 0) and -digit_id or (digit_id + 1) end,
printDigit = function(this, digit)
return utils.printAZ(digit)
end,
needtoDecimal = false,
convertBase = utils._convertBase,
},
['!-']={ --以0-9A-Z表達的阶乘进制並省略個位數 (遇到超過36位數可能會出現亂碼)
name = "!-", --[[oeis:A007623]]
display = "!",
page = "阶乘进制",
digitsplit = "",
point = ".",
placeValue = function(this, digit_id) return utils.factorial((digit_id < 0) and digit_id or (digit_id + 1))end,
baseValue = function(this, digit_id)return (digit_id < 0) and -digit_id or (digit_id + 2) end,
printDigit = function(this, digit)
return utils.printAZ(digit)
end,
needtoDecimal = false,
convertBase = utils._convertBase,
},
fib={
name = "fib",
display = "fib",
page = "斐波那契进制",
digitsplit = "",
point = ".",
placeValue = function(this, an)
local sqrt5 = math.sqrt(5)
local phi = (sqrt5 + 1) * 0.5
local fib_val = math.floor(math.pow(phi, math.abs(an)+((an < 0) and 2 or 1)) / sqrt5 + 0.5)
return (an < 0) and (1/fib_val) or fib_val
end,
baseValue = function(this, digit_id)return 1 end,
printDigit = function(this, digit)return tostring(digit) end,
needtoDecimal = true,
convertBase = utils.fibonacci_coding,
},
["fib-"]={
name = "fib-",
display = "fib",
page = "斐波那契进制",
digitsplit = "",
point = ".",
placeValue = function(this, an)
local sqrt5 = math.sqrt(5)
local phi = (sqrt5 + 1) * 0.5
local fib_val = math.floor(math.pow(phi, math.abs(an)+2) / sqrt5 + 0.5)
return (an < 0) and (1/fib_val) or fib_val
end,
baseValue = function(this, digit_id)return 1 end,
printDigit = function(this, digit)return tostring(digit) end,
needtoDecimal = true,
convertBase = function(int_digits, original_base, _destination_base, fractional_flag, total_digit)
local result = utils.fibonacci_coding(int_digits, original_base, _destination_base, fractional_flag, total_digit)
if fractional_flag then return result end
table.remove(result,#result)
return result
end,
},
fibcode={
name = "fibcode",
display = "fib code",
page = "斐波那契编码",
digitsplit = "",
point = ".",
placeValue = function(this, an)
local sqrt5 = math.sqrt(5)
local phi = (sqrt5 + 1) * 0.5
return math.floor(math.pow(phi, an+1) / sqrt5 + 0.5)
end,
baseValue = function(this, digit_id)return 1 end,
printDigit = function(this, digit)return tostring(digit) end,
needtoDecimal = true,
convertBase = function(int_digits, original_base, _destination_base, fractional_flag, total_digit)
return utils.fibonacci_coding(int_digits, original_base, _destination_base, fractional_flag, total_digit, true)
end,
},
ContinuedFraction={
name = "ContinuedFraction",
display = "ContinuedFraction",
page = "连分数",
digitsplit = ",",
point = ";",
placeValue = function(this, an)return 1 end,
baseValue = function(this, digit_id)return 1 end,
printDigit = function(this, digit)return tostring(digit) end,
needtoDecimal = true,
convertBase = utils.ContinuedFraction,
},
}
utils.specialBaseData['!'] = utils.specialBaseData['!']
utils.specialBaseData['阶乘'] = utils.specialBaseData['!']
utils.specialBaseData['阶乘进制'] = utils.specialBaseData['!']
utils.specialBaseData['階乘'] = utils.specialBaseData['!']
utils.specialBaseData['階乘進制'] = utils.specialBaseData['!']
utils.specialBaseData['階乘進位'] = utils.specialBaseData['!']
utils.specialBaseData['斐波那契进制'] = utils.specialBaseData.fib
utils.specialBaseData['斐波那契進制'] = utils.specialBaseData.fib
utils.specialBaseData['斐波那契编码'] = utils.specialBaseData.fibcode
utils.specialBaseData['斐波那契編碼'] = utils.specialBaseData.fibcode
utils.specialBaseData['fib code'] = utils.specialBaseData.fibcode
utils.specialBaseData['斐波那契'] = utils.specialBaseData.fib
utils.specialBaseData['連分數'] = utils.specialBaseData.ContinuedFraction
utils.specialBaseData['连分数'] = utils.specialBaseData.ContinuedFraction
utils.specialBaseData['continued fraction'] = utils.specialBaseData.ContinuedFraction
utils.specialBaseData['Continued Fraction'] = utils.specialBaseData.ContinuedFraction
function utils.getPlaceValue(base, digit_id)
local special_base_data = utils.getSpecialBase(base)
if special_base_data then
return special_base_data:placeValue(digit_id)
else
return math.pow(base, digit_id)
end
end
function utils.getBaseValue(base, digit_id)
local special_base_data = utils.getSpecialBase(base)
if special_base_data then
return special_base_data:baseValue(digit_id)
else
return base
end
end
function utils.getSpecialBase(base)
local base_string = mw.text.trim(tostring(base))
if utils.isNaN(base) then error(string.format("底數不能為 '%s'", base_string),2) end
local num_base = utils.tonumber(base_string)
if num_base then return nil end
local special_base_data = utils.specialBaseData[base]
if special_base_data then return special_base_data end
if mw.ustring.find(base_string, '[,;]') then
local point, split = '.', ''
local point_loaded = false
base_string = mw.ustring.gsub(base_string, ' +', '')
local base_name = base_string
local az_digits = false
if not mw.ustring.match(mw.ustring.sub(base_string, -2),'[%d∞]+') then
split = mw.ustring.sub(base_string, -2, -2)
point = mw.ustring.sub(base_string, -1, -1)
base_name = mw.ustring.sub(base_string, 1, -3)
if split == point and split == '.' then
split = ''
az_digits = true
end
point_loaded = true
end
local int_frac, int_base = mw.text.split(base_name..';', ';')
int_base = mw.text.split(int_frac[1], ',')
local int_base_count = #int_base
local load_bases = mw.text.split(base_name, '[,;]')
local bases, frac_bases = {}, {}
local max_base = 0
local repeat_base = false
for i=1,#load_bases do
local unit_base = utils.tonumber(load_bases[i])
if not unit_base then return nil end
if (i > 1 and unit_base == 0) or unit_base < 0 or (not utils.isInf(unit_base) and not utils.isInt(unit_base)) then return nil, string.format("不支援非正整數的混合底數 '%s' 進制", base_name) end
if math.abs(unit_base) > 36 and not point_loaded then
point, split = ';', ','
end
if unit_base > max_base then max_base = unit_base end
if i==1 and math.abs(unit_base) < 1e-14 then
repeat_base = true
else
if i > int_base_count then
frac_bases[#frac_bases + 1] = unit_base
else
table.insert(bases, 1, unit_base)
end
end
end
if #bases <= 0 then bases[1] = frac_bases[1]end
if #frac_bases <= 0 then
frac_bases = mw.clone(bases)
if repeat_base and #frac_bases > 1 then
frac_bases[#frac_bases + 1] = frac_bases[1]
table.remove(frac_bases, 1)
end
end
local new_base_data = {
name = base_string,
display = base_name,
page = "混合进制",
digitsplit = split,
point = point,
base_list = bases,
frac_base_list = frac_bases,
max_base = max_base,
repeat_base = repeat_base,
point_loaded = point_loaded,
az_digits = az_digits,
placeValue = function(this, digit_id)
local result = 1
for i=1,math.abs(digit_id) do
local using_list = digit_id < 0 and this.frac_base_list or this.base_list
local doing_index = this.repeat_base and utils.loop_mod(i, #using_list) or i
result = result * (using_list[doing_index] or using_list[#using_list] or 10)
end
return digit_id < 0 and (1/result) or result
end,
baseValue = function(this, digit_id)
return (digit_id < 0)
and (this.frac_base_list[this.repeat_base and utils.loop_mod(-digit_id, #(this.frac_base_list)) or (-digit_id)] or this.frac_base_list[#(this.frac_base_list)] or 10)
or (this.base_list[this.repeat_base and utils.loop_mod(digit_id + 1, #(this.base_list)) or (digit_id + 1)] or this.base_list[#(this.base_list)] or 10)
end,
printDigit = function(this, digit)
if (this.point_loaded or (math.abs(max_base) > 36)) and (not this.az_digits) then
return utils.tostring(digit)
else
return utils.printAZ(digit)
end
end,
needtoDecimal = false,
convertBase = utils._convertBase,
}
return new_base_data
end
return nil
end
function utils.checkSpecialBase(base)
local base_string = mw.text.trim(tostring(base))
if utils.isNaN(base) then error(string.format("底數不能為 '%s'", base_string),2) end
local num_base = utils.tonumber(base_string)
if num_base then return num_base end
local special_base_data = utils.specialBaseData[base]
if special_base_data then return special_base_data.name end
if mw.ustring.find(base_string, '[,;]') then
base_string = mw.ustring.gsub(base_string, ' +', '')
local check_string = base_string
if not mw.ustring.match(mw.ustring.sub(check_string, -2),'[%d∞]+') then
check_string = mw.ustring.sub(check_string, 1, -3)
end
local load_bases = mw.text.split(check_string, '[,;]')
for i=1,#load_bases do
local check_number = utils.tonumber(load_bases[i])
if not check_number then return nil end
if (i > 1 and check_number == 0) or check_number < 0 or (not utils.isInf(unit_base) and not utils.isInt(check_number)) then return nil end
end
return base_string
end
return nil
end
function utils.printAZ(digit)
local char_0 = mw.ustring.codepoint('0')
local char_A = mw.ustring.codepoint('A') - 10
local char_a = mw.ustring.codepoint('a') - 36
local char_100 = mw.ustring.codepoint('¡') - 62
local codepoint = digit + ((digit >= 10) and ((digit >= 36) and ((digit >= 62) and char_100 or char_a) or char_A) or char_0)
return mw.ustring.char(codepoint)
end
function utils.print_digit(digit, base)
local digit = utils.round(digit)
local special_base_data = utils.getSpecialBase(base)
if special_base_data then
return special_base_data:printDigit(digit)
elseif math.abs(tonumber(base)or 10) <= 36 then
return utils.printAZ(digit)
else
return tostring(digit)
end
end
function utils.printAllDigit(digits, base, precision, _subarg, fractional_flag)
local subarg = tonumber(_subarg) or 0
local special_base_data = utils.getSpecialBase(base)
local result, digitcomma = '', ''
if special_base_data then
digitcomma = special_base_data.digitsplit
elseif math.abs(tonumber(base) or 10) > 36 then
digitcomma = ','
end
for i=1,#digits do
if precision >= 0 and i == precision + 1 then break end
if subarg < 6 then
if result ~= '' then result = result .. digitcomma end
end
result = result .. utils.print_digit(digits[i], base)
if subarg >= 6 and subarg < 12 then
result = string.format("%s<sub>%s</sub>", result,
utils.tostring(special_base_data and special_base_data:baseValue(fractional_flag and -i or (#digits-i)) or base)
)
elseif subarg >= 12 and subarg < 18 then
result = string.format("%s<sub>%s</sub>", result,
utils.tostring(((not fractional_flag) and (#digits-i == 0)) and ((tostring(base):sub(1,1)=='!')and 0 or 1)
or (special_base_data and special_base_data:baseValue(fractional_flag and -i or (#digits-i-1))) or base)
)
end
end
return result
end
function utils.toDecimal(int_digits, fractional_digits, base)
local n = int_digits[#int_digits] or 0
local j = 1
for i = #int_digits-1, 1, -1 do
n = n + int_digits[i] * utils.getPlaceValue(base, j)
j = j + 1
end
for i = 1, #fractional_digits do
n = n + fractional_digits[i] * utils.getPlaceValue(base, -i)
end
return n
end
function utils.toDecimalComplex(int_digits, fractional_digits, imag, base)
if type(cmath.constructor) ~= type(tostring) then cmath = require("Module:Complex Number").cmath.init()end
base = cmath.constructor(base)
if not base then return nil end
local n = cmath.constructor(int_digits[#int_digits])
local j = 1
for i = #int_digits-1, 1, -1 do
n = n + int_digits[i] * utils.cintpow(base, j)
j = j + 1
end
for i = 1, #fractional_digits do
n = n + fractional_digits[i] * utils.cintpow(base, -i)
end
n = (imag and cmath.i or cmath[1]) * n
n:clean()
return n
end
function utils.print_base_string(int_result, fractional_result, ori_int_digits, ori_fractional_digits, sign, from, to, _subarg, prefix, suffix)
local subarg = tonumber(_subarg) or 0
local special_base_data_from = utils.getSpecialBase(from)
local special_base_data_to = utils.getSpecialBase(to)
local point_string = (math.abs(tonumber(to) or 10) > 36) and ';' or ((special_base_data_to or{}).point or '.')
if tostring(to):sub(-1,-1) == 'i' and (int_result:find(',') or (fractional_result or''):find(',')) then point_string = ';'end
local number_result = ((sign < 0) and '−' or '') .. (int_result == '' and '0' or int_result) .. (fractional_result == '' and '' or (point_string..fractional_result))
local result = (prefix or '') .. number_result .. (suffix or '')
if subarg % 6 == 1 then
result = string.format("%s<sub>(%s)</sub>", result, utils.tostring((special_base_data_to or{}).display or to))
elseif subarg % 6 == 2 then
result = string.format("(%s)<sub>%s</sub>", result, utils.tostring((special_base_data_to or{}).display or to))
elseif subarg % 6 == 3 or subarg % 6 == 5 then
local lib_num2zh = require('Module:NumberToChinese')
local success, num = pcall(utils.toDecimal, ori_int_digits, ori_fractional_digits, from)
if not success then
--轉換失敗時
if type(bignum.convertBase) ~= type(tostring)then bignum = require(main_module)end
if tonumber(to) then
num = (tonumber(to) == 10) and number_result or "數字" --不支援的部分
else
success, num = pcall(bignum.convertBase, number_result, 10, to)
if not success then num = "數字" end --不支援的部分
end
end
local base_name = lib_num2zh._numberToChinese(utils.tostring(to))
if base_name == lib_num2zh.NotANumber() then base_name = utils.tostring(to) end
result = mw.ustring.format("[[%s|%s]]<sub>[[%s|%s%s%s]]</sub>",
utils.tostring(num), result,
special_base_data_to and (special_base_data_to.page) or (base_name..'進制'),
(subarg % 6 == 5) and '' or '(',
utils.tostring((special_base_data_to or{}).display or to),
(subarg % 6 == 5) and '' or ')')
elseif subarg % 6 == 4 then
result = string.format("%s<sub>%s</sub>", result, utils.tostring((special_base_data_to or{}).display or to))
end
return result
end
return utils