模組:BaseConvert

本页使用了标题或全文手工转换
被永久保护的模块
维基百科,自由的百科全书
文档图示 模块文档[查看] [编辑] [历史] [清除缓存]

用來把數字轉換成2到36之間的任何進位制,可用於{{binary}}、{{octal}}、{{hexadecimal}}等模板當中。

使用方法

local BaseConvert = require('Module:BaseConvert')
BaseConvert.convert({n = 14600926, base = 16}) -- returns 'DECADE'

參數:

  • n:(必填)須轉換的數字,以字符串形式輸入。十进制的數字可直接以數字形式輸入。
  • base:(必填)目標進位制的底數,可取2至36(含)間的任何數字,不接受不是整數的底數,如进制(若底數輸入非整數或範圍外[2,36]的數將輸出不正確的結果)。若需要轉換不是整數的底數可以改用Module:BigNumber提供的convertBase函數
  • from:輸入值的進位制的底數,默認為10(如果輸入值以「0x」開頭,則默認為16),不接受不是整數的底數。所有非十进制都不支持分數,若需要計算非十进制的分數可以改用Module:BigNumber提供的convertBase函數
  • precision:小數點後的位數,達不到時會加「0」。不填該項會顯示所有位數,但不超過10位數。
  • width:小數點前至少顯示的位數,達不到時會加「0」。
  • default:n為空或非數字時所輸出的值,默認為n的值。
  • prefix:加在輸出值前的維基代碼。n為空或非數字時則不加。例如在轉換到十六进制後在前面加上0x
  • suffix:加在輸出值後的維基代碼。n為空或非數字時則不加。例如在轉換到八进制後在後面加上<sub>8</sub>

請注意,若輸入的數字過大,絕對值超過9007199254740991的話,可能會導致運算精度丟失。若需要轉換大數的进制可以改用Module:BigNumber提供的convertBase函數

從模板调用

從模板调用時,這個模組支援以ntom(n进制轉m进制)的函數名稱進行调用,例如:

代码 效果
{{#invoke:BaseConvert|16to10|  FF  }}

255

{{#invoke:BaseConvert|10to36|500}}

DW

{{#invoke:BaseConvert|10to16|Foo|default=0}}

0

這種调用方式除了|base=|from=|n=外的所有上列的參數皆可使用。也可以调用convert達到相同效果。

{{#invoke:BaseConvert|convert|n=要轉換的数値|base=底数|...}}

例如:

參見

local p = {}

local digits = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'

local function normalizeFullWidthChars(s)
	return mw.ustring.gsub(s, '[!-~]', function(s)
		return mw.ustring.char(mw.ustring.codepoint(s, 1) - 0xFEE0)
	end)
end

local function _convert(n, base, from, precision, width, default, prefix, suffix)
	n = tostring(n)

	-- strip off any leading '0x' (unless x is a valid digit in the input base)
	from = tonumber(from)
	if not from or from < 34 then
		local c
		n, c = n:gsub('^(-?)0[Xx]', '%1')
		if c > 0 and not from then from = 16 end
	end

	-- check for a negative sign. Do this while the input is still in string form,
	-- because tonumber doesn't support negative numbers in non-10 bases.
	local sign = ''
	local c
	n, c = n:gsub('^-', '')
	if c > 0 then sign = '-' end

	-- replace any full-width Unicode characters in the string with their ASCII equivalents
	n = normalizeFullWidthChars(n)

	-- handle scientific notation with whitespace around the 'e' e.g. '5 e7'
	n = n:gsub('%s*[eE]%s*', 'e')

	from = from or 10
	local num = tonumber(n, from)
	base = tonumber(base)
	precision = tonumber(precision)
	width = tonumber(width)

	if not num or not base then return default or n end

	local i, f = math.modf(num)

	local t = {}
	repeat
		local d = (i % base) + 1
		i = math.floor(i / base)
		table.insert(t, 1, digits:sub(d, d))
	until i == 0
	while #t < (width or 0) do
		table.insert(t, 1, '0')
	end
	local intPart = table.concat(t, '')

	-- compute the fractional part
	local tf = {}
	while f > 0 and #tf < (precision or 10) do
		f = f * base
		i, f = math.modf(f)
		table.insert(tf, digits:sub(i + 1, i + 1))
	end

	-- add trailing zeros if needed
	if precision and #tf < precision then
		for i = 1, precision - #tf do
			table.insert(tf, '0')
		end
	end

	local fracPart = table.concat(tf, '')

	-- remove trailing zeros if not needed
	if not precision then
		fracPart = fracPart:gsub('0*$', '')
	end

	-- add the radix point if needed
	if #fracPart > 0 then
		fracPart = '.' .. fracPart
	end

	return (prefix or '') .. sign .. intPart .. fracPart .. (suffix or '')
end

function p.convert(frame)
	-- Allow for invocation via #invoke or directly from another module
	local args
	if frame == mw.getCurrentFrame() then
		args = frame.args
	else
		args = frame
	end

	local n = args.n
	local base = args.base
	local from = args.from
	local precision = args.precision
	local width = args.width
	local default = args.default
	local prefix = args.prefix
	local suffix = args.suffix
	return _convert(n, base, from, precision, width, default, prefix, suffix)
end

setmetatable(p, {
	__index = function(t, k)
		local from, base = k:match('^([0-9]+)to([0-9]+)$')
		if not from then return nil end
		return function(frame)
			local args = frame.args
			return _convert(mw.text.trim(args[1]), base, from, args.precision, args.width,
				args.default, args.prefix, args.suffix)
		end
	end
})

return p